PS 12-3-16 *Music, *Vision, Cobra

*First a few comments:

The new music gear, that I mentioned last week, arrived over the last 3-days. Sylvia and I went to “Lowe’s”, a local hardware store, in order to buy another board and some fasteners for 2 of the new pieces. We spent most of today assembling that new shelf and connecting a few cables.

Basically, what we’re doing is connecting all the Audio (sound-out) from our music gear so we can hear “any” or “all” of it at the same Time through either my Macintosh or a small amplifier that sits on my desk. That’s what 1 of the new pieces of gear does. (For those interested, it’s the “Samson SM10” Stereo Line Mixer. Here’s the link:

We’re also connecting the “MIDI” (digital music information) between each of our instruments. For this, we bought the “iConnectivity MIO10”. Here’s the link:

The only cables we had Time to connect today were the “electrical” cables for each piece of gear. After counting-up how many cables we have to connect we were surprised to learn that there are almost 50 cables between these 13 pieces of gear! (20 for “stereo” Audio, 20 for MIDI — “in” and “out” and 10 for electrical).

Once everything is completed, Sylvia and I will be able to switch-on any musical instrument and just play it. If we want to control one Synthesizer with another, we’ll simply turn-on that 2nd instrument and the amplifier. If we want to record anything, we’ll only need to Launch Apple’s “GarageBand” software. No more cable switching or wasting Time figuring out which piece of gear is connected to another.s

In the middle of working on that shelf and connecting some of the cables, I became frustrated that I couldn’t get a couple of cables around the back of my desk.

  • My desk is made of pretend “wood”. It’s a single sheet of “wood” on top, like a table, and supported by 2 legs. Each is a sheet of “wood” which stands vertically.

Because of the way my desk is situated, it’s very difficult to get any wires to drop down behind it, travel along its side and to the electrical outlet. So as I was doing my best to get these cables from the back to the front I felt as though I tapped into something within the “Grid” or maybe something was sent to me from the “other side” because I was in that frequency to receive it. I don’t know but the idea that appeared in my mind was not mine.

I feel as though this idea is truly from the other side. As I now look at it (in my mind), it looks familiar… as if I’ve seen it being used somewhere… but this may just be the “residue” (package) this “Vision” was delivered in.

It’s not magic. It’s really just clever engineering. It looks like it could be “scaled-up” and used in the walls of a home. I’m just not sure how much weight this can support.

  • What I saw was a cable being pulled “through” the leg of my desk. The cable is inserted into a “notch” about halfway up the back of that leg and then just pulled-through to the front of that leg.
  • I was a bit confused at 1st and my brain instantly wondered how this could be done. So I looked closer at the details of what allowed this to happen.

Since I’m probably never going to Patent this, I was going to explain the details… but now I’m thinking I’d like to see if I can build a small version and see if it’s “worth its weight in gold”.

I have a feeling that this “Vision” was just waiting for someone to resonate to it, so it could be released into this realm. Most likely, lots of people have recently received this same “Vision”. I’m pretty sure whoever Patents this will be extremely rich… or maybe it’s already been done.

After thinking about this “Vision” for a bit, at one point, I wondered if this would allow for with more than a “wire” or “pipe” going through it. I thought about passing a sheet of plywood through it… maybe someone’s carrying a wide board down a hallway that’s not as wide. Would this work? As I tried to tune back into this “Vision”, using a sheet of plywood, the “Vision” disappeared. Maybe the energy of that idea was only provided to “spark” the manifestation of that particular creation and simply wants this built before variations are considered.

Question everything.


Another cryptic message from Cobra:

  • “Op Topaz in progress”

My comment: I would “guess” that “OP” means “Operation”. Other than that, I have no idea what this means and that’s Cobra’s intention… only the “Resistance Movement” know how to decipher his cryptic messages.

Question everything.

Here’s the link:


Published by

Paul & Sylvia

Since Sylvia "crossed-over" on 4/9/11", we have been working "through the Veil". In 2016, we finished an album together. Sylvia wrote it "over there" and sent the songs to me as "images", "feelings", etc. The various Rhythms, Melodies, Harmonies, Song Styles, etc. came to me as pieces, which I assembled into Songs. You can listen to this entire album for free from this page: (Be sure to scroll down, in order to read the Background information.)

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s